View PS224S_8488246.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PS224S version : a.002 issue date : 2012/02/02 file name : sp-PS224S-a.002.doc total pages : 11 4-channel secondary monitoring ic ?W@^?I? 9 ? 7 ? 1 silicon touch technology inc . 9-7f-1, prosperity road i, science based industrial park, hsin-chu, taiwan 300, r.o.c. tel 886-3-5645656 fax 886-3-5645626
4-channel secondary monitoring ic version:a.002 page 1 ??u}u??_??????P? unauthorized reproduction, duplication, us e or disclosure of this document will be deemed as infringement. PS224S PS224S 4-channel secondary monitoring ic general description PS224S is specially designed for switchi ng power supply system. four important functions of PS224S are the followings: over-v oltage protection, over-current protection, under-voltage protection and power good signal generating. ovp/uvp (over-voltage/under-voltage prot ection) monitors 3.3v, 5v and dual 12v to protect our power supply and pc, fp o/ goes to high when one of these supply voltages exceeds their normal operation voltage range. ocp (over current protection) monitors is33, is5, is12a, is12b input current sense. an adjustable over-current condition composed of iref and ?protection current range resistor? helps users design ocp easily. an additional protection input pin provides the flexibility for design protection circuit. power good signal generating notifies personal computer when power supply is ready or power supply is going to shutdown, therefore it can provide a reliable power supply environment. features ? over/under-voltage protection and lock out ? over-current protection and lock out ? additional protection input ? fault protection output with open drain output stage ? open drain power good output signal for power good input ? built-in 300ms power good delay ? ac on 58ms delay for uv/oc protection ? 38ms pson/ control de-bounce ? wide power supply range (3.8v~16v) ? special care for ac power off
4-channel secondary monitoring ic version:a.002 page 2 ??u}u??_??????P? unauthorized reproduction, duplication, us e or disclosure of this document will be deemed as infringement. PS224S block diagram vs33 r7 r8 r9 v re f v re f 3.3 ov 3.3 uv vs5 r4 r5 r6 v re f v re f 5 ov 5 uv vs12b r1 r2 r3 v re f v re f 12 ov 12 uv band-gap reference power on reset clock generator 38ms de-bounce constant current source i ref fpo/ pgi pgo ri gnd por v ref clk 73us de-bounce h : 300ms l : 4.5us delay 1m h : 58ms l : 4.5us delay vcci s q r 1m h : 4ms l : 4.5us delay vs12a 12 ov 12 uv r1 r2 r3 v re f v re f 1.25v pext internal power vcci = 4v pson/ v ref vcci h : 20ms l : 4.5us delay is5 is12a i ref x 8 12 oc vcci step down to near 2.5v is12b i ref x 8 12 oc vcci step down to near 2.5v i ref x 8 5 oc vcci step down to near 2.5v is33 i ref x 8 3.3 oc vcci step down to near 2.5v 1.25v 3ms delay vcc vcc 3ms delay 14us delay pgi selection
4-channel secondary monitoring ic version:a.002 page 3 ??u}u??_??????P? unauthorized reproduction, duplication, us e or disclosure of this document will be deemed as infringement. PS224S timing chart v pgi t d2 t d1 1.25v 0.25v 1.13v ovp ovp/uvp/ocp/pext ovp t d1 t b1 t d3 t d2 fpo/ pson/ pgi vcc pgo uvp/ovp/ocp pext protect pson/ turn on ac turn on pson/ turn off pson/ turn on ac turn off is12a vs12b is12b vs5 is5 vs12a vs33 is33 pext
4-channel secondary monitoring ic version:a.002 page 4 ??u}u??_??????P? unauthorized reproduction, duplication, us e or disclosure of this document will be deemed as infringement. PS224S pin descriptions pin no pin name descriptions 1 pgi power good input signal pin 2 gnd ground 3 fpo/ inverted fault protection output ,open drain output stage 4 pson/ remote on/off control input pin 5 is12a 12v(1) over curr ent protection input pin 6 ri current sense setting 7 is12b 12v(2) over curr ent protection input pin 8 vs12b 12v(2) over/under voltage protection input pin 9 pext external protection detect input pin 10 is5 5.0v over current protection input pin 11 is33 3.3v over current protection input pin 12 vs12a 12v(1) over/under voltage protection input pin 13 vs33 3.3v over/under voltage protection input pin 14 vs5 5.0v over/under voltage protection input pin 15 vcc power supply 16 pgo power good output signal pin , open drain output stage absolute maximum ratings parameter rating unit s torage temperature (t stg ) -40 to +125 c o perating temperature (t opr ) -30 to +90 c s upply voltage (v cc ) vcc -0.5 to +16.0 v vs12a, vs12b, is12a,is12b -0.5 to +16.0 v vs5, is5 -0.5 to +9.0 v vs33, is33,pext -0.5 to +7.0 v pgi -0.5 to +16.0 v input voltage range (v i ) pson/ -0.5 to vcc+0.5 v fpo/ -0.5 to vcc+0.5 v o utput voltage range (v o ) pgo -0.5 to vcc+0.5 v o utput current for ri (i ri ) ri 12.5 to 62.5 ua pson/, pgo > 5000 v fpob, vs12a, vs12b > 2000 v pgi, is12a, is12b, vcc > 3000 v esd susceptibility* (v esd ) others > 4000 v * human body model (hbm).
4-channel secondary monitoring ic version:a.002 page 5 ??u}u??_??????P? unauthorized reproduction, duplication, us e or disclosure of this document will be deemed as infringement. PS224S electrical characteristics , vcc=12v, t a = 25oc. (unless otherwise specified) power supply section parameter conditions min typ max unit supply voltage 3.8 5.0 16.0 v supply current v pson/ = 5v 4.5 5.0 ma power on reset threshold voltage (v por ) 3.2 3.4 3.6 v power on reset hysteresis (v hyst ) -0.15 -0.3 -0.45 v over-voltage section parameter conditions min typ max unit vs33 3.9 4.0 4.1 v vs5 5.9 6.1 6.3 v over-voltage threshold vs12a/b 13.75 14.1 14.45 v under-voltage section parameter conditions min typ max unit vs33 2.8 2.9 3.0 v vs5 4.2 4.4 4.6 v under-voltage threshold vs12a/b 10.3 10.8 11.0 v over-current section parameter conditions min typ max unit vs33, vs5 -5 0 3 mv offset voltage vs12a/b -4 0 2 mv constant isink current (i sink ) 148 160 172 ua pgi, analog input parameter conditions min typ max unit threshold voltage for start t d1 1.16 1.25 1.33 v threshold voltage for start t d2 0.15 0.25 0.35 v threshold voltage for mask oc,uv 1.05 1.13 1.21 v hysteresis (v hyst )* +/-20 +/-50 +/-80 mv * all of the comparator for pgi input in block diagram.
4-channel secondary monitoring ic version:a.002 page 6 ??u}u??_??????P? unauthorized reproduction, duplication, us e or disclosure of this document will be deemed as infringement. PS224S electrical characteristics (continued) pgo, open drain digital output parameter conditions min typ max unit leakage current (i lkg ) v pgo =5v 5 ua low level output voltage (v ol ) i sink =10ma 0.3 v fpo/, open drain digital output parameter conditions min typ max unit leakage current (i lkg ) v fpo/ =5v 5 ua low level output voltage (v ol ) i sink =20ma 0.3 v pson/, analog input parameter conditions min typ max unit threshold voltage ( high ) 1.40 1.50 1.60 v threshold voltage ( low ) 0.75 0.85 0.95 v external protection detect section parameter conditions min typ max unit threshold(v th ) 1.20 1.25 1.30 v hysteresis (v hyst ) +/-20 +/-50 +/-80 mv switching characteristics , vcc=12v, t a = 25oc. parameter conditions min typ max unit pgi to pgo delay time (t d1 ) 200 300 400 ms short circuit delay time (t d2 ) pgi> 0.25v 40 58 75 ms short circuit delay time (t d2-1 ) pgi< 0.25v 400 500 600 ms pgo to fpo/ delay time (t d3 ) 2 4 6 ms under voltage delay time (t d4 ) 2.4 3 3.6 ms over current delay time (t d5 ) 13 20 27 ms over voltage delay time (t d6 ) 9 14 19 us pext delay time (t d7 ) 2.4 3 3.6 ms pson/ de-bounce time (t b1 ) 24 38 52 ms pgo noise de-glitch time (t b2 ) 47 73 100 us
4-channel secondary monitoring ic version:a.002 page 7 ??u}u??_??????P? unauthorized reproduction, duplication, us e or disclosure of this document will be deemed as infringement. PS224S application typical 4 rails sps 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 pgi pson/ ri is12b vs12b is12a fpo/ gnd pgo vs33 is33 is5 pext vs12a vs5 vcc r r oc5 r oc33 r r i r pgi-2 c pgi-2 1k +5v sb pgo pson +5v sb s.p.s. secondary side r s5 +5v output r s12b +12vb output +12vb coil r s12a +12va output +12va coil r s33 +3.3v output +3.3v coil r pgo 4.7k c pgo 0.1 uf r oc12b 0.1 u f c pgi-1 r pgi-1 c by vdet 0.1 u f c 12a-2 0.1 u f c 12b-2 0.1 u f c 33-1 0.1 u f c 5-1 c 12b-1 c 12a-1 oc12a pext 0.1 u f c ps o 0.1 u f n notes: 1. zener diode or resist or or both of t hem can be used in component x. 2. the bypass capacitor c by suggests to be 0.1uf~ 10uf and layout nearby pin vcc. 3. the recommend sense values of r s12(1) , r s12(2) , r s5 and r s33 are 0.002 . 4. over-current protection design example: (1) a i ref 20 = , () = = = k i v r ri ri i 5 . 62 20 25 . 1 (2) r s5 =0.002 , ref oc v v i r i v = = + 8 002 . 0 5 5 5 (3) if +5v ocp trip point is 20a, () = = 250 20 8 20 002 . 0 5 oc r
4-channel secondary monitoring ic version:a.002 page 8 ??u}u??_??????P? unauthorized reproduction, duplication, us e or disclosure of this document will be deemed as infringement. PS224S package specification e 1 e b 1 a 1 e a s a 2 ? 0.0 0.5 1.0 inch 0 10 25 mm 15 5 20 ( 16-pin dip ) l seating plane b e b d dimension in mm symbol dimension in inch note a 1 0.381 0.015 a 2 3.175 3.302 3.429 0.125 0.13 0.135 b 1 0.400 0.480 0.560 0.015 0.019 d 18.669 19.495 20.320 0.735 0.768 0.800 e 1 6.223 6.812 7.400 0.245 0.268 0.291 e 2.290 2.540 2.790 0.090 0.100 0.110 l 2.540 3.175 3.810 0.100 0.125 0.150 s 1.120 0.044 a 5.334 0.210 e 7.366 7.620 7.874 0.290 0.300 0.310 e b 8.509 9.017 9.525 0.335 0.355 0.375 b 1.300 1.500 1.700 0.051 0.059 0.067 ? 0 7 15 0 7 15 min normal max min normal max
4-channel secondary monitoring ic version:a.002 page 9 ??u}u??_??????P? unauthorized reproduction, duplication, us e or disclosure of this document will be deemed as infringement. PS224S package specification ( 16-pin sop ) dimension in mm symbol dimension in inch note a 1 0.051 0.250 0.002 0.010 c 0.190 0.250 0.007 0.010 d 9.800 10.008 0.386 0.394 e 1.270 0.050 l 0.400 1.270 0.016 0.050 a 1.346 1.753 0.053 0.069 e 3.800 4.000 0.150 0.157 h 5.791 6.200 0.228 0.244 b 0.330 0.510 0.013 0.020 ? 0 8 0 8 min normal max min normal max
4-channel secondary monitoring ic version:a.002 page 10 ??u}u??_??????P? unauthorized reproduction, duplication, us e or disclosure of this document will be deemed as infringement. PS224S the products listed herein are designed for or dinary electronic applications, such as electrical appliances, audio-visual equipmen t, communications devices and so on. hence, it is advisable that the devices should not be used in medical instruments, surgical implants, aerospace machinery, nuclear power control systems, disaster/crime-prevention equipment and the like. misusing those products may directly or indirectly endanger human life, or cause injury and property loss. silicon touch technology, inc. will not take any responsibilities regarding the misusage of the products mentioned above. anyone who pur chases any products described herein with the above-mentioned intention or with such misused applicat ions should accept full responsibility and indemnify. silicon touch technol ogy, inc. and its distributors and all their officers and employees shall defend jointly and severally against any and all claims and litigation and all damages, co st and expenses associated with such intention and manipulation. silicon touch technology, inc. reserve the right to make changes to their products or to discontinue any product or service without not ice, and advise customers to obtain the latest version of relevant information to verify , before placing orders, that information being relied on is current and complete.

▲Up To Search▲

Price & Availability of PS224S

	To Download PS224S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .